A stylish complement to the FD’s curves and flowing with its lines this unique spoiler provides a subtle finish to the rear end.

Using a selected mix of fibreglass cloth and matt this strong lightweight piece is easy to fit and remove.

A choice of Black or White polished gel coat finish is offered.

In making this item we have discovered two different rear hatch glass shapes. The first mould we did produced a piece which was a perfect hand in glove fit, but only on certain screens. We decided to dig a bit further and found a different curved screen where the piece was not a satisfactory fit to our standards.

There wouldn’t have been any point in making two different moulds, as the variation in screens does not seem to follow any pattern. After careful consideration and many adjustments, we are now able to offer a product which is essentially a half way house.

Whilst it’s not a perfect fit on any one screen, it is a very good fit on all screens. To most, the fit may not look like an issue and can easily be made to be a perfect fit with some strategic taping while curing.

This can be used in conjunction with the rear wiper although will obstruct the washer jet.

This item is available in fibreglass, with black or white polished gel coat finish and is of a high quality.

Add modern styling and functionality with our discreet rear bumper light. Each light featuring a high output white and red LED and reflector (EU approved) to satisfy legal requirements.

The construction is of solid polyurethane and will be finished in black primer ready to be colour coded.

A 3 wire male and female connector is fitted this will replace the factory plug using a shared common earth (which can be taken from the original loom) along with a positive feed for the reverse light (again supplied in the original loom) leaving the need for a positive feed for the fog light to be installed.

The lights will be supplied with circular vinyl stickers which can be used to cover the reflectors and lenses during painting.

N.B. Care should be taken when handling these lights, they are liable to break if dropped.

Concept-7s R-Magic style Oil Cooler Air Ducts (Pair).

Oil Cooler Air ducts for 99 spec bumper

Concept-7s DAMD style rear diffuser.

Made in fibreglass to the highest quality.

This product will require painting.

White or Black Gel coat finish.

OEM Style Side Skirts. Constructed from fibreglass with an excellent fit.

Sold as a pair consisting of 4 pieces.

A choice of Black or White polished gel coat finish is offered.

SANAI Style Side Skirts. Constructed from fibreglass with an excellent fit.

Sold as a pair.

A choice of Black or White polished gel coat finish is offered.

We have moulded directly from a brand new Mazda splitter. This is a 2 piece item exactly as Mazda supply but without the moulded clips the plastic one has. Fitment is as normal as OEM just without the additional prongs. Supplied in Black or White gel coat these will need painting as they have a joint line.

FEED Style Rear Quaters + Petrol cap for FD RX7

Excellent quality fibreglass panels no air bubbles or shrinkage with our products.

Excellent fitment (as original).

Black or white gel coat finish (please state which when ordering).

OEM Bonnet

Standard finish is White gel coat, Black is available upon request.